eegID 1.6

License: Free ‎File size: 350.21 KB
‎Users Rating: 0.0/5 - ‎0 ‎votes

ABOUT eegID

eegID by Isomer Programming LLC enables you to connect over Bluetooth(TM) to a NeuroSky(TM) MindWave Mobile Headset (or others compatible with ThinkGear(TM) technology), and view Electroencephalography (EEG) data, specifically these fields: PoorSignal, EEG Raw Value, EEG Raw Value Volts, Attention Level, Meditation Level, Blink Strength, Delta(1-3Hz), Theta(4-7Hz), Alpha Low(8-9Hz), Alpha High(10-12Hz), Beta Low(13-17Hz), Beta High(18-30Hz), Gamma Low(31-40Hz), and Gamma Mid(41-50Hz). This data can be recorded and stopped at will, or configured with a maximum recording limit (ex: 30min, or 10MB), after which a spreadsheet-importable comma-separated values (CSV) file including time stamps of all signal records listed above is prompted to the user to optionally email as an attachment with a populated subject line containing the current date and time (the Send button allows the last record to be resent after exit). A minimum record interval may also be specified (ex: every 1 minute). During the recording process, a user may select different tags to differentiate internal recording periods. GPS can also be optionally enabled to tag the latitude and longitude for each record. The last recorded eegIDRecord.csv file is located on the external storage device within the folder "eegid"; file extraction via USB connection to a computer may be necessary if your selected recording limit exceeds the standard 10MB email attachment size. Note that the EEG Raw Value Volts is calculated with: [ rawValue * (1.8/4096) ] / 2000. For troubleshooting, also note that the PoorSignal value indicates invalid EEG positioning (adjust device until this is 0 for best results), and that while PoorSignal is greater than 0, some signals are not received (Attention, Meditation, Blink Strength). The purpose of this application is to allow easy mobile EEG data capture with simple immediate measurements and later deep analysis or data storage for reference.