LectroRM 1.87
You'll be able to download in 5 seconds.
ABOUT LectroRM
Remote control for Lectrosonics SM and LM transmitters. This remote functions by playing an encoded audio tone into the microphone attached to the transmitter.. Controllable Settings: (*Some or all of the settings may not be supported by your particular transmitter) - *Audio Level - *Frequency - Sleep Mode - Lock Mode - *Power Output - *Low Cut Filter - *LED On/Off Features - Simplistic design for fast and easy use - Sounds are generated dynamically, not loaded from memory - Volume control on each page for easy access *Not all remote control tones are supported by every Lectronsonics device. Lectrosonics SM transmitters must be configured to accept remote control tones. Hold down arrow while turning on the transmitter. Then select "rc on". The original SM requires firmware version 1.5 (released 12/05) to respond to the remote. The firmware version number appears upon turning on the unit. Any tones properly received but not supported will be met with "---------" response on the transmitter screen. Lectrosonics is a registered trademark of Lectrosonics Inc. Lectrosonics Inc. does not provide support for this app.