Power Viewer Mobile 2 2.0.5
You'll be able to download in 5 seconds.
ABOUT Power Viewer Mobile 2
With the new Power Viewer Mobile 2 App you are able to use all Rohde&Schwarz NRP series RF Power Sensor with your Android smartphone or tablet. Requirements: o R&S®NRP Power Sensor o R&S®NRP-Zxx Power Sensor o Device with Android 5.0 or higher o USB-OTG adapter cable (If the sensors should be used via USB) o Network connection with PoE (If Network Sensors should be used) Optionally a USB hub can be used to connect more than one USB sensor to the Android device. Supported Features: o Continuous average mode o Trace mode o Up to four sensors simultaneously o Support for Measurement over Network (with R&S®NRP-xxXN power sensors) o Flexible user interface o Extensive settings for the supported measurement modes Important: This app depends on a working USB host (USB – On The Go) controller built into your device. Some smartphones block high-power USB devices. In this case only the sensors with low supply power requirements will work, or the use of a self-powered USB hub is necessary. The Trace Measure mode is only available with Sensors with support of this mode. If a Sensor doesn’t support this mode, nothing will be shown if switching to the Trace mode. Warning: