UDP TCP Server - No Ads 50.1

ABOUT UDP TCP Server - No Ads

Ever needed to send a UDP/TCP commands from your Android device to a UDP/TCP enabled device on your WiFi or Cellular network? Now you can! Featuring: * UDP incoming and outgoing support * TCP incoming and outgoing support * Internet DNS support * User-defined buttons to store pre-set commands to send * Unlimited user defined templates to use for different UDP/TCP clients (templates save IP and Port settings as well) * Send commands to multiple IP's and ports at the same time * Acting as a server, can get responses back from the network * Buttons support colors, if the command that was sent matches the command that was received, button becomes green, otherwise, becomes red * Easy to use * Simple and clean interface * Supports Android 2.2 and up * Pre-stored templates to control "Sharp - AQUOS TV" / "NEC - TV's" * Buttons can have any color you want!! If you have any questions, please visit our forum: http://goo.gl/qpI7ku Like us on facebook: https://goo.gl/EYXyaY Follow us on Twitter: @idodevfoundatio If you wish to use our application as a remote control for you windows PC, you can use this great TCP server: If you would like to create a template on a PC and then load it to my application, you can create a XML file based on this structure, and place it in this path on your device /UDPTCPServer/Templates/ Sample XML: https://goo.gl/i1oHDQ If you want to become a beta tester: https://goo.gl/L9qTCV A quick guide: 3. Click buttons to send commands A few notes: * Scroll down to see the phone IP and port it is listening on * You can long press a button to modify it's settings * You can change the number of buttons shown on screen * You can save a set of labels + commands as a template, to easily change the devices you are controlling (Click the + sign at the ActionBar) How to use "handle incoming settings" - developed for Phil Green: 1. Enable the feature in the settings 2. Set the application to 'listen' on a UDP port 3. Send a UDP string to the device in this SPECIFIC format: **B,,,,,,; You can have as many button as you want within the same string, here is an example of how to use this: **B05,,Test Name5,,PEACE,,#ffffff00;**B06,,Test Name6,,123,,#ff0000ff;**B07,,,,456,,#ff00ffff; 4. Note: the string MUST end with ';' 5. If you wish to only change the label and not the command or color, simply leave that blank, for example: **B07,,,,OK,,,,; This will set Button 7 command to be "OK" and will not change the color or name (label) How to use responses from "handling incoming messages": The purpose here is to allow the remote device to confirm that the settings were set properly. To use this: 1. Enable in settings (both the handling of incoming messages and the reply) 2. Set the correct outgoing settings (IP/Port), of where the application should send the response to 3. Send a "setting" string The protocol is this: **R++,,+ Possible Status Codes: 01 - success 02 - error Sample reply string will be: **R01,,45 Which means, incoming settings were processed without a problem and it took a total of 45ms. Please contact me should you have any questions