The free version of the advanced sound measurement software DSSF3 is now available. It consists of the signal generator, sound recorder and player, and the peak level meter. DSSF3 Basic works with the latest soundboards. Two or more soundboard can be selected easily. The sampling rate can be set up to the maximum value allowed by the hardware. Signal Generator spec Tone, noise, sweep and pulse is generated as a stereo signal. As for tone, sinusoidal, triangle, square, and saw-tooth wave can be chosen. Each channel can generate different signals with specified frequencies. As for noise, white and pink can be chosen. Sweep is a tone signal of which frequency is varied continuously. Pulse signal is generated with specified number of time, duration and interval. Recording and Playback Recording of sound up to about 10 minutes is possible. Playback of the recorded sound can be measured by the FFT analyzer (Spectrum, octave analysis, oscilloscope, ACF IACF measurement) simultaneously.
VERSION HISTORY
- Version 5.1.x.x posted on 2008-02-01
Program Details
- Category: Audio & Multimedia > Other
- Publisher: yoshimasa-electronic-inc
- License: Free
- Price: N/A
- Version: 5.1
- Platform: windows
EULA
Yoshimasa Electronic Inc. (hereinafter referred to as "Yoshimasa") grants to the customer the right to use the software program (hereinafter referred to as "the Program") provided with these Conditions of Use, based on the Articles outlined below, provided that the customer agrees to said Articles. The customer shall take full responsibility for the selection of the Program so as to obtain the expected results, as well as for installation of the Program, applications, and application results. 1. Granting of Usage Rights Yoshimasa grants to the user the right to use the Program according to the conditions outlined here. 2. Term of Use (1) These usage conditions shall be effective from the time the Program is installed by the customer. (2) In the event that the customer violates any of these usage conditions, Yoshimasa may revoke usage rights for the Program at any time. In this event, the customer must destroy all copies and all components of the Program. 3. Usage Rights (1) The customer may use the Program on only one computer. (2) The Program is considered to be "used" on a given computer when it loaded onto the temporary memory (e.g., RAM) or fixed memory (e.g., hard disk or other memory device) of the computer in question. 4. Copyrights The copyrights and all other rights related to the Program (including software, manual, accompanying documents, etc.) shall remain the property of Yoshimasa. 5. Copying, alteration, or integration of the Program. (1) The customer may not copy, alter, integrate, or undertake any other processing of the Program. (2) The customer may not, under any circumstances, copy manuals or other related documents provided with the Program. (3) These usage conditions do not constitute a transfer to the customer of intangible property rights related to the Program. 6. Prohibition of Transfer of the Program, etc. The customer may not copy, sell, distribute, hand over, or loan the Program or any part of the Program to a third party, or otherwise allow a third party to use the Program. 7. Prohibition of Reverse Compiling, etc. The customer may not subject the Program to reverse engineering, reverse compiling, or reverse assembly. 8. Guarantee Limitations Yoshimasa offers no guarantees whatsoever with regard to the Program. The customer shall take full responsibility for any problems arising in relation to the Program, and shall bear all costs resulting from such problems. 9. Exemption from Responsibility Yoshimasa shall bear no responsibility whatsoever in the event that losses are suffered either directly or indirectly in relation to use of the Program.